Skip to product information
1 of 7

EPEVER

EPEVER MPPT Charge Controller 20A

EPEVER MPPT Charge Controller 20A

Regular price $164.99 USD
Regular price $0.00 USD Sale price $164.99 USD
Sale Sold out
  • EPEVER XTRA Charge controller series, MPPT charge controller, 20A rated charge current controller; Accept Max input Solar power 520W when battery is 24V, 260W when 12V system; Max solar input voltage up to 100V(92V At 25℃/77°F environment temperature)
  • Negative Grounding controller 20amp, able to work with 12V 24V system AUTO, work with 12V24V Lead-acid(Sealed,Gel,Flooded) and LiFePO4, Li(NiCoMn)O2 battery, User.
  • Xtracer controller with Max. conversion efficiency up to 98.6%, Advanced MPPT technology & ultra-fast tracking speed guarantee tracking efficiency up to 99.5%, Limit charging power & current over rated value.
  • 20amp MPPT charging with Adanced Display, Wide MPP operating voltage range(Battery voltage +2V)~72V, Real-time energy statistics function
  • IP32 Ingress protection and Full PV charging protection, High quality and low failure rate components of ST or IR to ensure service life, CE certification(LVD EN/IEC62109,EMC EN61000-6-1/3)

 

Product Description

Xtracer mppt contoller's feature

  • XTRA N series mppt controller with XDS2 display adopt the advanced MPPT control algorithm. can minimize the maximum power point loss rate and loss time, quickly track the maximum power point(MPP) of the PV array and obtain the maximum energy from solar array under any conditions.
  • Can increase the ratio of energy utilization in the solar system by 20%-30% compared with PWM charging method.
  • Advanced MPPT technology & ultra-fast tracking speed, tracking efficiency up to 99.5%.
  • Maximum DC/DC transfer efficiency is as high as 98.3% , full load efficiency is up to 97.3%.
  • Advanced MPPT control algorithm to minimize the MPP lost rate and lost time.
  • Accurate recognizing and tracking of multi-peaks maximum power point
  • Wide MPP operating voltage range((Battery voltage +2V)~72V).
  • Support the 12V 24V lead-acid and lithium batteries, programmable temperature compensation
  • Real-time energy statistics function, Limit charging power & current over rated value
  • Power reduction automatically over temperature value,Comprehensive electronic protection
  • Support monitoring and setting the parameters via APP or PC software(Accessories optional, doesn't include).

20amp mppt contoller's charging parameter

  • System nominal voltage: 12/24VDCAuto(When lithium battery is used, the system voltage can’t be identified automatically.)
  • Rated charge/discharge current: 20A
  • Battery voltage range: 8~32V
  • Max. PV open circuit voltage: 92V At 25℃ environment temperature, 100V At minimum operating environment temperature
  • Max. PV input power: 520W when battery system is 24V, 260W when battery system is 12V.
  • Battery type: Lead-acid battery(Sealed/Gel/Flooded/User), Lithium battery(LiFePO4, Li(NiCoMn)O2, User)
  • Mounting dimension: 160×149mm with Φ5mm Mounting hole size
  • Recommended cable: 10AWG(6mm2)
  • Accessories support: Remote Temperature Sensor/USB to RS485 cable/ MT50 Remote Meter/WIFI-eBox-WIFI-01/Bluetooth-eBox-BLE-01( all the accessories is optional, doesn't include)
  • Protection: PV Over Current/power, PV Short Circuit, Battery Over Voltage, Battery Over Discharge....etc
  • Temperature compensate coefficient: -3mV/℃/2V (Default)
  • Grounding: Common negative
  • Discharge circuit voltage drop: ≤0.23V
  • RS485 interface: 5VDC/200mA(RJ45)
  • LCD backlight time: Default:60S,Range:0~999S(0S:the backlight is ON all the time)
  • Working environment temperature: -25℃~+50℃
  • Relative humidity: ≤95%, N.C.
  • Enclosure: IP32(3-protection against solid objects: protected against solids objects over 2.5mm. 2-protection against liquids: protected against direct sprays up to 15°from the vertical)

 

Manual Control (default)

  • Control ON/OFF of the load via the button or remote commands (e.g., APP or PC software).

Light ON/OFF

  • Set your own's turn ON/OFF voltage,once your solar panel's voltage reach this value, your load will ON/OFF
  • ON voltage=sunset; OFF voltage=sunrise

Light ON+ Timer

  • After load ON according the voltage you set, you can set how long your load keep working. e.g. 101: Load will be ON about 1 hour after sunset
  • Two working time periods can be set, setting range is 101~115 and 201~215
  • 201 means Load will be ON about 1 hour before sunrise

Time Control

  • Control the load ON/OFF time through setting the real-time clock.

TIPS WHEN WIRE YOUR SOLAR CHARGE CONTROLLER

  1. Turn the adjusting terminal counterclockwise, Insert your wire into the new opening between the plate and the "top" of the terminal hole.
  2. Make sure your battery must be atleast 60% charged prior to connecting to controller, or controller can't read your battery correctly.
  3. Connect the battery to the controller first!! (When LCD power on, means controller read battery successfully , if not please reconnect it.)
  4. Connect your solar panel array to the controller after Controller's LCD power on.
  5. Never connect your solar panel array to controller when LCD display doesn't power on(Means your battery does not connect successfully).
  6. Careful your input power and voltage does not exceed the max. When the maximum open circuit voltage of the photovoltaic array exceeds 92V (when Ambient temperature 25°C/77°F), the controller will be damaged.
  7. Do not reverse the polarity when wiring, or controller will be damaged.
  8. Lithium batteries seting only can be parameterized via Phone APP or PC software. (Accessories optional, doesn't include)
  9. When the battery type is an ordinary lead-acid battery, controller does not have the function of low temperature protection.
  10. When the battery type is lithium-ion battery, controller does not have the system voltage recognition function. Need set battery‘s correct voltage and type via mobile APP or computer software before use.

 

View full details